SEMI AUTOMATIC, SINGLE HEAD BENDING MACHINE, CONTROLLED BY PC, TYPE KUB-CNC

KUB-CNC is a single head universal bending machine, specially designed for tubular elements. It concists of a single bending head controlled by AC.servo motor. The bending head is moveable sideways by a pneumatic cylinder making it possible to bend both right

and left bends at the same time. To change bending radius, the bending mandrel can easily be changed. A pneumatic, V-shaped, support makes it easy to to place the elements in the right position.

There is several different methods to bend the elements. One element at a time with invidual lengthmeasurement of each element. The value is transmitted to the PC and the bending starts at a preprogrammed point. Four element at the same time with a centralizing system. One element at a time with a rotating vize, making it possible to bend in several planes. Big bending radius can be achived by putting the bending head in a certain angle and pressing the element through. With this methode only one element at a time can be

bend. The PC with key-board is placed in the control-cabinette. The program is Windows. As an option the customer can by a special version of the program, making it possible to make different bending programs at his office PC. Up to 10.000 programs can be stored.

Technical information

Diameter of element:6-12mm

Diameter tolerance:+-0,1mm

Minimum length of element with fixed reference:200mm

Minimum length of element with rotating vice:250mm

Maximum length of element:3200mm

Maximum length of terminal pin:30mm

Maximum bending speed:400º/sec

Estimated time for a 180° bend:1,8sec

Estimated time for a 90° bend:1,2sec

Maximum speed of carriage vice:1200mm/sec

Maximum speed of rotating vice:1,5º/sec

Maximum number of bends in one cycle:100

Max/Min. diameter of bending mandrel70mm/16mm

Minimum length of the last straight part:50mm